Eddy Current/Proximity probes are used for non contact vibration and displacement measurement. The core applications for these sensors is monitoring shaft expansion, relative vibration and speed on a range of rotating machinery from turbines to pumps and compressors. A proximity probe has a small tip made of a conductive material. When the probe is brought close to the target, an eddy current is induced in the target material. The strength of the eddy current is proportional to the distance between the probe and the target. The driver unit converts the eddy current signal into a voltage output that is proportional to the distance.
SHOW
SORT BY
Senturion XPR02 Proximity Probe
The Senturion XPR02 proximity probe system is a 5mm tip proximity sensor that uses eddy current principle to measure distance up to 2.5mm with resolution of less than 1 micrometer. It is designed for tight installation and harsh environments (up to 180°C). The system includes a driver unit with a 5
Price range : £0.00 - £0.00
Senturion XPR04 Proximity Probe
The Senturion XPR04 proximity probe system is an 8mm tip proximity sensor that uses eddy current principle to measure distance up to 2.5mm or 4mm with resolution of less than 1 micrometer. It is designed for monitoring targets from as little as 16mm in applications, even those in a harsh environment
Price range : £0.00 - £0.00
Senturion XPR12 Proximity Probe System
The Senturion XPR12 proximity probe system is an 25mm tip proximity sensor that uses eddy current principle to measure distance up to 12mm with resolution of a few micrometers. It is designed for monitoring targets twice the probe tip diameter, even in a harsh environments (up to 180°C). The system
Price range : £0.00 - £0.00
Senturion XPR08 Proximity Probe
The Senturion XPR08 proximity probe system is an 20mm tip proximity sensor that uses eddy current principle to measure distance up to 8mm with resolution of a few micrometers. It is designed for monitoring targets twice the probe tip diameter, even in a harsh environments (up to 180°C). The system
Price range : £0.00 - £0.00
Senturion XPD12 Disc Mounted Proximity Probe
The Senturion XPD12 proximity probe system with a disc mount proximity sensor with a 25.0mm diameter. The probe uses eddy current principle to measure distance up to 12.7mm with resolution of less than 0.003mm. It is designed for monitoring targets from as little as 15mm in installation, even in a h
Price range : £0.00 - £0.00
Senturion XPD25 Disc Mounted Proximity Probe
The Senturion XPD25 Proximity probe system with a disc mount proximity sensor with a 55.0mm diameter. The probe uses eddy current principle to measure distance up to 25.0mm with resolution of less than 0.003mm. It is designed for monitoring targets from as little as 50mm, even in a harsh environment