A selection of protocol converters that will provide a two way signal conversion from one type to another. Units can converter: ModBus TCP to ModBus RTU/ASCII; ModBus TCP to DF1; ModBus to NMEA; ModBus ACSII/RTU to Hostlink; ModBus ASCII/RTU to DF1; and a ModBus ASCII/RTU Multiplexer.
SHOW
SORT BY
SGW1-IA3-MB-HL Modbus ASCII / RTU to Hostlink Converter
SGW1-IA3-MB-HL converts an OMRON PLC (Hostlink Protocol) into a Modbus ASCII/RTU Slave easily. Using SGW1-MB-HL you can connect an OMRON PLC to a Modbus Network. Protocol conversion is based on easy-to-fill translation tables. EG: You can read OMRON registers DM0100 to DM0199 through Modbus register
Price range : £438.42 - £438.42
MiniPlex3-USB MODBUS to NMEA Converter and Multiplexer
MiniPlex-3-USB NMEA multiplexer with 4 NMEA inputs or MODBUS inputs and 2NMEA outputs and USB PC interface
Price range : £258.22 - £258.22
SGW1-IA3-MB-NM NMEA to Modbus Converter
The SGW1-MB-NM allows you to read NMEA 0183 data coming from a GPS device or weather station using a Modbus device. This unit will convert NMEA data to Modbus registers, allowing Latitude, Longitude, Course, Speed, etc from a GPS device to be collect via a Modbus network.
Price range : £305.20 - £305.20
EGW1-MB-HT HART to Modbus TCP, RTU and ASCII Converter
The EGW1-IA3-MB-HT module is used to connect any industrial equipment with a HART protocol to a Modbus TCP, RTU or ASCII protocol. Allowing HART data to be collected by a Modbus network or transmitted across an Ethernet connection using Modbus TCP. An EGW1-MB-HT unit can be used to connecte
Price range : £495.12 - £495.12
SGW1-IA3-MMP Modbus Multiplexer
The SGW1-IA3-MMP is a multi-function device that allows multiplexing, conversion and data exchange between Modbus RTU and ASCII serial devices. The SGW1-IA3-MMP can be used to connect up to 3 Modbus Master devices to up to 3 Modbus Slave devices via 4 configurable RS232/RS485 ports. Each port can
Price range : £364.72 - £387.40
SGW1-IA2-MMP Modbus Multiplexer
The SGW1-IA2-MMP Modbus Multiplexer is capable of connecting up to 3 RS232 Modbus ASCII/RTU devices to single RS485 Modbus ASCII/RTU device transparently. The unit has four independent serial ports that can be connected to a Master or Slave unit with different baud rates or Modbus protocols (ASCII o
Price range : £364.88 - £364.88
EGW1-MB-WIFI - Modbus ASCII / RTU to Modbus TCP Converter with Ethernet or WiFi Connection
This is a device used to connect any Modbus enabled industrial equipment to an Ethernet network via RJ45 port, or WiFi. It was designed for industrial applications where all equipment involved uses Modbus TCP, Modbus ASCII or Modbus RTU communications. EGW1-MB-WIFI can connect PLCs, drives, temperat
Price range : £724.72 - £746.46
EGW1-IA3-MB - Modbus ASCII or RTU To Modbus TCP Protocol Converter
The EGW1-MB module is used to connect any industrial equipment with Modbus RTU or ASCII, to an Ethernet TCP / IP protocol to transmit data across an Ethernet connection. An EGW1-MB unit is available with 10 digital I/O channels for additional monitoring and onsite control. This option makes it diffe
Price range : £377.01 - £486.61
EGW1-2ETH-IA3-MB - Serial Modbus To Modbus TCP Converter with Dual Ethernet Switch
The EGW1-2ETH module is used to connect any industrial equipment with Modbus RTU or ASCII, to a TCP / IP protocol to transmit data across an two RJ45 Ports. An EGW1-2ETH unit is available 4 RS232/RS485 ports , or a single isolated RS232/485 or RS422 port.