A selection of Analogue and Digital aquisition modules that can aquire 4-20mA, 0-10V, PT100, Thermocouple and Digital inputs with Modbus or Hostlink outputs. Units can also be configured to send information directly to a server, including our M2M web interface to provide a web browser for viewing and downloading data.
SHOW
SORT BY
DigiRail Connect - Ethernet I/O Module
The DigiRail Connect has eight models with five different channel types: digital input channels; analogue input channels; digital output channels; relay output channels; and analog output channels. The connectivity of DigiRail connect allows it to be used as slave Modbus RTU device in RS485 netwo
Price range : £157.48 - £185.20
DigiRail I/O Modules
The DigiRail Modules are a set of small DIN Rail mounted acquisition modules that will accept a range of different inputs. Specific units can be configured to accept mA, V, mV, PT100, Thermocouple or digital pulse inputs, plus one unit provides 2 relay outputs. The unit will connect to a ModBus RTU
Price range : £71.82 - £76.22
RME1 Ethernet Web Enabled Analogue Acquisition Unit
The RME1 is an analogue acquisition module that will accept 4-20mA, 0-10V, PT100 and thermocouple (Type J, K, T, R, N, E, S) inputs. The unit provides an output over Modbus TCP, web page (HTTP), SNPM (Version 1), CVS/XML and can be configurable with the M2M web interface. Data can be viewed in real
Price range : £481.38 - £586.65
RME2 Ethernet Web Enabled Analogue Acquisition Unit
The RME2 is an analogue acquisition module that will accept 4-20mA, 0-10V, PT100 and thermocouple (Type J, K, T, R, N, E, S) inputs. The unit provides an output over Modbus TCP, web page (HTTP), SNMP (Version 1), CVS and XML. Data can be viewed in real time, table and graph format, and downloaded to
Price range : £395.90 - £426.14
RMS2 Acquisition Module with Serial Communications
The RMS2 Modules are suitable for acquiring Voltage, Current, PT100 or Thermocouple inputs on a Modbus network. Each module can acquire inputs from up to 8 channels and convert the readings to a ModBus ASCII or Modbus RTU serial output. RMS2-AI collects 0-10V and 4-20mA analogue inputs, RMS2-PT will
Price range : £354.33 - £411.97
RMS1-TD Quad temperature meter with Modbus interface
RMS1-TD is a temperature acquisition module with serial slave Modbus communication. Accurate, yet inexpensive means of obtaining temperature readings through slave Modbus RTU. Provides an end-to-end solution for remote monitoring applications. No additional modules required.
Price range : £52.18 - £213.62
RMS1-GR Digital and Analog I/O in Modbus Serial
The RMS1-GR allows for the acquisition of digital and analogue inputs into a Modbus serial protocol and will allow for the control of up to 16 relay or transistor outputs. The RMS1-GR can operate as a Modbus Master or Slave in Modbus RTU or Modbus ASCII.