Contact our technical sales team now to discuss your requirements
£0.00
You have no items in your shopping cart.
Click basket to edit.
Currently Shopping by:
Shopping Options
The Lab 4.0 is an instrument suitable for gas analysis in all laboratorial activities. The instrument can be used for differential pressure manometer for very small measuring areas, Particle Measurement System or Environmental Gas Analysis with Volatile Organic Compound (VOC) and Indoor Air Quality (IAQ) Sensors, plus ambient sensors for barometric pressure, temperature and humidity.
The MC 4.0 ManoAir is part of the MC 4.0 range but comes with a pressure sensor module that allows the unit to measure absolute or differential pressure. The MC 4.0 ManoAir includes an internal logger for up to 1 million readings and pressure module for connecting 2 sensors. The pressure modules are used for precise flow and differential pressure measurement of gaseous media on filters and in pitot tubes in the ventilation duct. They are used in heating, ventilation and air conditioning as well as in clean rooms. Two pressure modules are available for the measuring ranges ±2000 Pa and ±20 kPa, which can be exchanged with a single movement.
The MC 4.0 ManoAir is the replacement for the ManoAir 100 Digital Manometer.
The MC 4.0 is suitable for the measurement of very low air flows, as well as air temperature and humidity readings. The measurement with a thermoelectric anemometer with uni-directional or omni-directional probe with flow ranges as low as 1 or 5m/s. The MC 4.0 includes an internal logger for up to 1 million readings and port for connecting a separate temperature and humidity probe. As a further bonus, extramodules are available to convert the MC 4.0 for vane anemometers, or differential pressure pitot tubes.
Hazardous Area Approved | ![]() |
The MC 4.0 is suitable for determining the flow velocity, temperature and relative humidity of gaseous and liquid media. The measurement with a vane anemometer is considered to be the most accurate of the possible measurement methods. The MC 4.0 includes an internal logger for up to 1 million readings, and options for connecting 2 sensors. As a further bonus, the periodic calibration of the MC 4.0 only requires the renewal of the measuring heads. This means that the device does not need to be sent in as with comparable products. Vane anemometers are available with plastic sensors that can be used for non-aggressive gases or liquids and Steel sensors suitable for use in aggressive media or higher temperature ranges.
The MC 4.0 is the replacement for the MC20 display.
Hazardous Area Approved | ![]() |